WISECOM, INC. WS-1414EM4 Card Type Modem (synchronous/asynchronous) Chipset UMC Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus Serial Fax Class Class I & II Data Modulation Bell 212A ITU-T V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, V.42, V.42bis [Image] CONNECTIONS Function Label Function Label Line in CN1 RS-232/422 CN3 Line out CN2 DC power in CN4 DIAGNOSTIC LED(S) LED Color Status Condition MR Red On Power is on MR Red Off Power is off TR Red On DTR signal is high TR Red Off DTR signal is low SD Red On Modem is transmitting data SD Red Off Modem is not transmitting data RD Red On Modem is receiving data RD Red Off Modem is not receiving data OH Red On Modem is off-hook OH Red Off Modem is on-hook CD Red On Carrier signal detected CD Red Off Carrier signal not detected DIAGNOSTIC LED(S) (CON’T) LED Color Status Condition AA Red On Auto-answer enabled AA Red Off Auto-answer disabled EC Red On Error correction enabled EC Red Off Error correction disabled SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, D, E, H, L, M, N, O, P, Q, T, V, X, Y, Z &C, &D, &F, &G, &K, &L, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z Extended AT Commands \A, \B, \C, \G, \J, \K, \N, \Q, \T, \X %A, %B, %C, %D, %E, %N, %Q S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S26 S27, S30, S91 Note: See MHI documentation for complete information. UNIDENTIFIED COMMANDS Command Default S15 83 S17 75 S19 3 S20 0 S24 72 S28 16 Proprietary AT Command Set See WISECOM, INC. WS-1414IM4 for a full command summary.